General Control - Sharp DK-A1H Operation Manual

General control

DK-A1H
DK-A1H(BK)
ENGLISH
To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode
or demonstration mode.
Illumination light control
Press the SNOOZE/DIMMER button to adjust the brightness of the
display and subwoofer illumination light.
Subwoofer iIIumination light and display bright
Subwoofer iIIumination light and display dim
Subwoofer iIIumination light off and display gets dimmer
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
Volume control
Main unit and remote control
operation:
Press the VOL (+ or –) button to
increase or decrease the volume.
E-9
E SOUND control
When the E SOUND/DEMO button is pressed, the current mode
setting will be displayed. To change the setting, press the E SOUND/
DEMO button repeatedly to toggle ON or OFF. When ON is selected,
the unit will enter the E SOUND mode and adjust low bass and high
frequency automatically according to volume input.
Equaliser
When the EQ button is pressed, the current mode setting will be
displayed. To change to a different mode, press the EQ button
repeatedly until the desired sound mode appears.
No equalisation.
FLAT
For rock music.
ROCK
For classical music.
CLASSICS
POPS For pop music.
Vocals are enhanced.
VOCAL
JAZZ For jazz.
Function
When the FUNCTION button on remote control is pressed, the
current function will change to different mode, press the FUNCTION
button repeatedly to select desired function.
iPod Tuner FM ST
AUX
Note:
The backup function will protect the memorised function mode for a
few days should there be a power failure or the AC power lead
becomes disconnected.
Tuner FM mono
AM