Specifications - Sharp DK-A1H Operation Manual

Specifications

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
Power source AC 220 - 240 V, 50 Hz
Power consumption Power on: 28 W
Power stand-by: 0.6 W (*)
Output power PMPO: 64 W
Front Speaker:
MPO: 10 W (5 W + 5 W) (DIN 45 324)
RMS: 4 W (2 W + 2 W) (DIN 45 324)
RMS: 4 W (2 W + 2 W) (DIN 45 500)
Subwoofer:
MPO: 12 W (6 W + 6 W) (DIN 45 324)
RMS: 10 W (5 W + 5 W) (DIN 45 324)
RMS: 6 W (3 W + 3 W) (DIN 45 500)
Speaker 1-way type light-up speaker system
Front Speakers: 6.5 cm (2-1/2") - 12 ohms -
Full Range
Subwoofer: 10 cm (4") - 8 ohms - Woofer
Speaker maximum Front Speakers: 4W/Channel
input power Subwoofer: 10W/Channel
Speaker rated Front Speakers: 2W/Channel
input power Subwoofer: 5W/Channel
Output terminals Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Video output: 1Vp-p
Input terminals Auxiliary (audio signal):
500 mV/47 k ohms
Dimensions Width: 400 mm (15-3/4")
Height: 145 mm (5-3/4")
Depth: 251 mm (9-7/8")
Weight 4.3 kg (9.5 lbs.)
*This power consumption value is obtained when the demonstration
mode is cancelled in the power stand-by mode. Refer to page 7 to
cancel the demonstration mode.
Tuner
Frequency range FM: 87.5 - 108 MHz
AM: 522 - 1620 kHz
DK-A1H
DK-A1H(BK)
ENGLISH
E-26