Table of Contents
Advertisement
18
FUNC key
MODE key
key
STOP/C
START/COPY
key
TALK
key
POLL
Rapid keys (01-09, ___
This key is first pressed to select various func-
tions such as timer transmission, timer poll-
ing, relay broadcasting, confidential transmis-
sion, programming function, printing function,
various initial setting functions and user switch
programming.
When the key is pressed, prompts for availa-
ble modes (functions) appear on the display
After the document is set in the document
feeder, when this key is pressed, "t" appears
on the display; by pressing it repeatedly, "STD"
(standard), "FINE" and "H-TONE" (half-tone)
can be selected. "CONTRAST: AUTO" or
"CONTRAST: DARK" appears in the lower sec-
tion of the display. Select the desired mode
depending on the document.
This key is used to terminate a transmission,
reception, copy operation, other operations
and alarms. Also serves as a clear key in
programming.
key
This key is used to start transmissionlrecep-
tion or copying. Also serves as the entry key.
Press this key when you wish to talk with the
person on the other end of the line, either be-
fore or after a transmission/reception. When
it is pressed before transmission/reception,
"TALK REQUEST" appears on the display; dur-
ing transmission/reception, the arrow mark on
the display points to "TALK" to indicate that
"talk" has been reserved.
Press this key after dialing if you wish to
receive documents from the unattended re-
mote machine which are in its feeder.
switch __
This switch is used to select either automatic
or manual receive mode.
Press one of these keys to dial the telephone
number. Programmed into that rapid key and
automatically transmit any documents that are
in the feeder.
Rapid keys (from lo/P1 to 121P3) works as a
program key too.
Write on the labels the names of the parties
whose telephone numbers are programmed
with these keys for rapid dialing.
Advertisement
Table of Contents
