Timeroperations - Sharp FO-1450 Operation Manual

~--"'-'-"' ' '"'-;':---"'"""" TIMEROPERATIONS' '" "'
.....
The Timer function allows you to set a transmission and/or polling operation to be
performed automatically at a time you specify. One transmission operation and one
polling operation can be set at the same time, and the times they will be performed
can be specified up to 24 hours in advance.
As an example, you can use this function to take advantage of off-peak telephone
rates without having to be there when the operation is performed.
Note: Only a Speed Dial number can be used to dial the receiving machine.
Setting a timer operation
1
FUNCTION
Press the keys shown at left. "TIMER
o
m
MODE" will appear in the display.
2
m
'r @
Press "#" to set a transmission operation
(SEND MODE), or "*" to set a polling
operation (POLLING MODE).
3
Press "1" to select SET.
a
4
Enter the time at which you want the op-
Ommm
eration to take place (2 digits for the
hour and 2 digits for the minute).
(Example: 9:25)
5
START
CJ
Press the START key,
@
SPECIAL FUNCTIONS 5-9