Using an Extension Phone to Send a Fax
Default Line Monitor setting
The default setting for Line Monitor (listening to the line and fax tones through
the speaker during a fax transmission) is initially MONITOR OFF. If desired,
you can change the default setting to MONITOR ON.
1
Make sure that the date and time
display of fax mode appears (if needed
FAX
press
2
Press
3
Press
4
Press
to select MONITOR OFF.
5
Press
Using an Extension Phone to Send a Fax
If you have connected an extension phone to the TEL. SET socket on the
machine as explained on page 15, you can use the extension phone to send a
fax.
♦
Using an extension phone to send a fax allows you to listen to the line and
talk to the other party before faxing.
♦
This procedure cannot be used when the machine is busy with another job.
Note that if the transmission is not sucessful because the line is busy or a
line error occurs, automatic redialling will not take place.
80
) and then press
.
.
to select MONITOR ON or
repeatedly to exit.
MENU
.
Display:
FAX SETTING
1: FAX RESOLUTION
1: MONITOR ON
The display briefly shows
your selection, then:
3: TIMER SEND