Selecting Temporary Copy Settings - Sharp AM-400 Online Manual

Selecting Temporary Copy Settings

If MEMORY IS FULL appears...
If the memory becomes full while multiple originals are being scanned using
the auto document feeder, MEMORY IS FULL will appear in the display.
♦
Press
already been scanned. The remaining originals will be ejected from the
feeder.
♦
Press
Selecting Temporary Copy Settings
You can adjust one or more of the following temporary copy settings before
pressing
Enlarge/reduce
ZOOM
Press
percentage appears in the display. The preset percentages are 100%, 70%,
50%, 25%, 400%, 200%, and 141%.
70%: A4 --> A5
141%: A5 --> A4
♦
After selecting one of the above preset percentages, you can also press
Z
or
The maximum percentage is 400% and the minimum percentage is 25%.
When the desired percentage appears, press the
54
if you want to make copies of only the originals that have
if you want to cancel the copy job.
to begin copying.
one or more times until the desired enlargement or reduction
A
to increase or decrease the percentage in increments of 1%.
key.
ENTER