Sharp AR-M256 Setup Manual page 9

Installation in Windows 98/Me/2000 (USB cable)
1
The USB cable must not be connected
to the machine. Make sure that the
cable is not connected before
proceeding.
If the cable is connected, a Plug and Play
window will appear. If this happens, click the
"Cancel" button to close the window and
disconnect the cable.
The cable will be connected in step 16.
Note
2
Insert the "Software CD-ROM" into your
computer's CD-ROM drive.
3
Double-click "My Computer" (
then double-click the [CD-ROM] icon
( ).
4
Double-click the "Setup" icon (
5
The "SOFTWARE LICENSE" window
will appear. Make sure that you
understand the contents of the license
agreement, and then click the "Yes"
button.
You can show the "SOFTWARE
Note
LICENSE" in a different language by
selecting the desired language from
the language menu. To install the
software in the selected language,
continue the installation with that
language selected.
6
Read the message in the "Welcome"
window and then click the "Next"
button.
7
Click the "Custom" button.
), and
8
Click the "Printer Driver" button.
Before installing the software, be sure to
click the [Display Readme] button and
).
view the detailed information on the
software.
9
Click the "Next" button.
INSTALLING THE SOFTWARE
7