Sharp CD-MPX880H Operation Manual page 37

4
Within 10 seconds, press the
select "ONCE SET" or "DAILY SET", and press the
MEMORY button.
5
Press the or
"REC", and press the MEMORY button.
White
The illustrations show the daily timer setting.
6
Press the or
then press the MEMORY button.
The illustrations show the timer playback setting in the daily
timer mode.
7
Press the or
then press the MEMORY button.
8
Set the time to finish as in steps 6 and 7 above.
or button to
button to select "PLAY" or
Red
button to adjust the hour and
button to adjust the minutes and
9
Switch input with the
press the MEMORY button.
To select the timer playback source: CD, TUNER, TAPE 1 or
TAPE 2.
To select the timer recording source: TUNER.
When you select the tuner, select a station by pressing the
or button, and then press the MEMORY
button.
If a station has not been programmed, "NO PRESET" will
be displayed and timer setting will be cancelled.
10
Adjust the volume using the VOLUME control, and then
press the MEMORY button.
Do not turn the volume up too high.
11
Press the ON/STAND-BY button to enter the power
stand-by mode.
The "TIMER" indicator lights up and the unit is ready for timer
playback or timer recording.
or button, and then
5
4
3
2
1
TIMER
CD
5
4
3
2
1
Continued to the next page
CD-MPX880H
37