Table of Contents
Advertisement
46
If you need further assistance
❖ Occasionally a defective PC Card slips through quality control.
If another computer with a PC Card slot is available, try the
card in that machine. If the card malfunctions again, it may be
defective.
Resolving PC Card problems
Here are some common problems and their solutions:
The slot appears to be dead. PC Cards that used to work
no longer work.
Check the PC Card status:
1
Click Start, Control Panel, System and Maintenance, and
then Device Manager.
2
Double-click the PCMCIA adapter.
3
Double-click the appropriate PC Card.
The operating system displays your PC Card's Properties
dialog box, which contains information about your PC Card
configuration and status.
The computer stops working (hangs) when you insert a
PC Card.
The problem may be caused by an I/O (input/output) conflict
between the PCMCIA socket and another device in the system. Use
Device Manager to make sure each device has its own I/O base
address. See "Fixing a problem with device manager" in the
electronic user's guide for more information.
Since all PC Cards share the same socket, each card is not required
to have its own address.
If you need further assistance
If you have followed the recommendations in this section and are
still having problems, you may need additional technical assistance.
This section contains the steps to take to ask for help.
Before you contact Toshiba
Since some problems may be related to the operating system or the
program you are using, it is important to investigate other sources
of assistance first.
Try the following before you contact Toshiba:
❖ Review the troubleshooting information in your operating
system documentation.
❖ If the problem occurs while you are running a program, consult
the program's documentation for troubleshooting suggestions.
Contact the software company's technical support group for
their assistance.
Advertisement
Table of Contents
