Gigabyte GA-Z77X-UP7 User Manual page 51

& CPU Vcore/Dram Voltage/+3.3V/+12V
Displays the current system voltages.
& CPU/PCH/System Temperature
Displays current CPU/Chipset/System temperature.
& CPU/System FAN Speed
Displays current CPU/system fan speeds.
& CPU Warning Temperature
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold, BIOS
will emit warning sound. Options are: Disabled (default), 60
& CPU/System Fan Fail Warning
Allows the system to emit warning sound if the CPU fan or system fan are not connected or fail. Check the
fan condition or fan connection when this occurs. (Default: Disabled)
& CPU Fan Control mode
Lets the BIOS automatically detect the type of CPU fan installed and sets the optimal CPU
Auto
fan control mode. (Default)
Sets Voltage mode for a 3-pin CPU fan.
Voltage
Sets PWM mode for a 4-pin CPU fan.
PWM
Note: The Voltage mode can be set for a 3-pin CPU fan or a 4-pin CPU fan. However, for a 4-pin CPU
fan that is not designed following Intel PWM fan specifications, selecting PWM mode may not effectively
reduce the fan speed.
& CPU Fan Speed Control (CPU_FAN and SYS_FAN3 Connectors)
Allows you to determine whether to enable the CPU/system fan speed control function and adjust the fan
speed.
Allows the CPU/system fan to run at different speeds according to the CPU/system
Normal
temperature. You can adjust the fan speed with EasyTune based on your system
requirements. (Default)
Allows the CPU/system fan to run at slow speeds.
Silent
Allows you to control the CPU/system fan speed under the Slope PWM item.
Manual
Allows the CPU/system fan to run at full speeds.
Disabled
& Slope PWM
Allows you to control the CPU fan speed. This item is configurable only when CPU Fan Speed Control is
set to Manual. Options are: 0.75 PWM value /
& 1st/4th System Fan Speed Control (SYS_FAN1 and SYS_FAN4 Connectors)
Allows you to determine whether to enable the system fan speed control function for the system fans
connected to the SYS_FAN1 and SYS_FAN4 connector and adjust the fan speed.
Allows the system fans to run at different speeds according to the system temperature. You
Normal
can adjust the fan speed with EasyTune based on your system requirements. (Default)
Allows the system fans to run at slow speeds.
Silent
Allows you to control the system fan speed under the Slope PWM item.
Manual
Allows the system fans to run at full speeds.
Disabled
& Slope PWM
Allows you to control the system fan speed. This item is configurable only when 1st/4th System Fan Speed
Control is set to Manual. Options are: 0.75 PWM value /
C/140 F, 70 C/158
o o o
C ~ 2.50 PWM value / C.
o o
C ~ 2.50 PWM value /
o
- 51 -
F, 80 C/176 F, 90 C/194 F.
o o o o o
C.
o
BIOS Setup