Sharp AR-M236 Key Operator's Manual page 9

Level 1
PRINT SETTINGS
SCANNER SETTINGS
Level 2
DEFAULT SETTINGS
INTERFACE SETTINGS
NETWORK SETTINGS
INITIALISE AND/OR STORE SETTINGS
INITIAL FILE FORMAT SETTING
INITIAL QUALITY SETTING
INITIAL RESOLUTION SETTING
DEFAULT DISPLAY SETTINGS
THE NUMBER OF DIRECT ADDRESS /
SENDER KEYS DISPLAYED SETTING
KEY OPERATOR PROGRAM LIST
Level 3
PROHIBIT NOTICE PAGE PRINTING
PRINT DENSITY LEVEL
PROHIBIT TEST PAGE PRINTING
ROTATED PRINT
FORCED OUTPUT OF PRINT
EXCLUDE BYPASS-TRAY FROM ATS
DISABLE DEFAULT SETTING CHANGES
HEXADECIMAL DUMP MODE
I/O TIMEOUT
PARALLEL PORT EMULATION SWITCHING
USB PORT EMULATION SWITCHING
NETWORK PORT EMULATION SWITCHING
PORT SWITCHING METHOD
ENABLE PARALLEL PORT
ENABLE USB PORT
ENABLE NETWORK PORT
ENABLE ECP
IP ADDRESS SETTING
ENABLE TCP/IP
ENABLE NetWare
ENABLE EtherTalk
ENABLE NetBEUI
RESET THE NIC
RESTORE FACTORY DEFAULTS
STORE CURRENT CONFIGURATION
RESTORE CONFIGURATION
7