Connecting To A Computer - Epson PowerLite S5 Series/77c User Manual

note
If you have an iBook with an
RCA video-out port, follow
the instructions for
connecting to a video device
on page 25.
Setting Up the Projector
18
To project from overhead, you'll need the optional ceiling mount
hardware. (See page 14 for ordering information.) You'll also need to
select or
Front/Ceiling
Extended menu. To project from the rear, select
more information.

Connecting to a Computer

You can connect the PowerLite projector to any computer that has a
standard VGA or BNC monitor port, including PC notebook and
laptop computers, Macintosh PowerBooks and iBooks, and hand-held
devices.
Follow the instructions in this section to:
■ Connect the projector to your computer with the VGA cable
included with the projector.
Connect the projector to your computer with a commercially
■
available VGA–5BNC cable.
After connecting the projector to your computer, you may also
want to:
Connect a USB cable to your projector so that you can use the
■
remote control as a wireless mouse; see page 21
Connect a monitor to the projector so you can view your
■
presentation close-up as well as on-screen (not necessary if you're
using a laptop); see page 22
■ Connect the projector to your computer with a commercially
available audio cable to play computer audio; see page 23.
for the Projection option in the
Rear/Ceiling
. See page 63 for
Rear