Table of Contents
Advertisement
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
To receive an S-Video signal, you need an S-Video cable. One is
■
usually provided with your video device, or you can purchase it
from Epson. See page 14.
■
To receive a component video signal from a VCR or other video
device, you need a D-sub, 15-pin, VGA-to-component video
cable, which is available from Epson. See page 14.
Some older PowerBooks and Macintosh desktop models may
■
need a Macintosh video adapter; see your computer dealer. Older
iMac systems may need a special adapter to provide a VGA output
port; see your computer dealer.
To receive an audio signal, you need a commercially available
■
audio adapter cable; see your computer or electronics dealer.
To use the projector's remote control to change presentation
■
slides, you need a USB cable; see your computer or electronics
dealer.
Welcome
13
Advertisement
Table of Contents
