Sharp AR-150 SERIES Operation Manual page 38

Sending Documents
When placing the Original on the Table:
1
Confirm that there are no
documents in the SPF, and open
the original cover.
2
Place the document face down on
the original table. Align the
document according to the
original scale in the illustration
below. (Line up the center of the
edge of the document with the ( )
mark.)
Original scale
3
Gently close the original cover.
Note: When using the original table, do not set documents in the SPF.
4
Press the BOOK SEND key to
scan the page into memory.
5
Select the document size from
those displayed.
You can now make resolution or
contrast settings as described in
the next section and dial and
transmit the fax. (See "Dialing and
Transmitting" in this chapter)
6
Press the BOOK SEND key. If you
have more than one document to
read into memory, place the next
page, and press the BOOK SEND
key to read each page.
4-2
04 USING FAX b(SUK) A5.p65
mark
HOW TO USE THE FAX FUNCTION
2 11/10/99, 17:28