Explanation Of Setting Programs; Fax Settings; Default Display Settings - Sharp AR-FX10 Operation Manual

KEY OPERATOR PROGRAMS

EXPLANATION OF SETTING PROGRAMS

The key operator programs for the fax function of the machine are explained here.
For key operator programs that are related to the copy function and general use of the machine, see the key
operator's guide. For programs related to the printer and network scanner functions, see the corresponding manuals.
NOTE
Settings established with the key operator programs can be verified by printing them out (page 8-12).

FAX SETTINGS

I I I I Fax default settings
The default fax settings can be changed as needed to
better suit the needs of your workplace.
The "Fax default settings" are as follows:
G Default display settings
G The number of direct address keys displayed setting
G Must input next address key at broadcast setting
G Initial resolution setting
G Own number and name set
G Auto wake up print
G Pause time setting
G Original print on transaction report
G Speaker volume setting
G Transaction report print select setting
G Remote reception number setting (only when
extension phone is connected)
G ECM (This setting is only effective if the other
machine is a G3 machine that supports ECM)
G Activity report print select setting
G Default exposure settings
G Distinctive ring detection
G Disable of fax number direct entry

Default display settings

You can select the initial display that appears when
you press the [IMAGE SEND] key to change to fax
mode or when you press the [CA] key in fax mode.
Normally the initial display is set to the condition
settings screen (page 1-4).
G Condition settings screen
G Address directory (ABC)
G Address directory (Group)
When an address directory (ABC or Group) is
selected, the selected index of that address directory
screen (page 1-5) is set as the initial screen.
8-4
The number of direct address keys
displayed setting
The number of one-touch keys displayed in each
address directory screen can be changed from 8
(the normal setting) to 6 or 12.
Touch 6, 8, or 12 to select the desired number.
NOTE
For the key name that appears in each one-touch
key, a maximum of 18 characters can appear when
the number of one-touch keys displayed is set to 6 or
8. A maximum of 10 characters can appear when the
number of one-touch keys displayed is set to 12.
Must input next address key at
broadcast setting
You can select whether the [NEXT ADDRESS] key
must be touched before entering the next
destination when
transmission (page 3-2). Normally the machine is
set so that touching the [NEXT ADDRESS] key can
be omitted except when the numeric keys are used
to enter one full fax number after another full fax
number.
Example: Normal setting (factory setting)
XXXX NEXT ADDRESS One-touch NEXT ADDRESS One-touch
Dial
Can be omitted
XXXX NEXT ADDRESS XXXX
Dial Dial
Cannot be omitted.
If the box is checked, it will no longer be possible to
omit the [NEXT ADDRESS] key as shown in the
above example. Even if the next destination to be
entered is a one-touch key, the [NEXT ADDRESS]
key must be touched before the one-touch key can
be entered. If an operator attempts to enter the
next destination without touching the [NEXT
ADDRESS] key, a double-beep alarm will sound
and the entry will be rejected.
performing a broadcast
Can be omitted