Resetting The Calculator; Reset; Using The Reset Switch - Sharp EL-9650 Operation Manual

CHAPTER 1

14. Resetting the Calculator

(1) Reset

• Use the reset function in case a malfunction occurs, if you want to delete all data, or
want the values for various modes to return to the default settings.
• You can either press the reset switch located on the back of the unit or select the
reset function in the menu.
* Take care since resetting the unit will delete all memory data.

(2) Using the reset switch

The reset switch is located on the back of the unit.
1. Press the reset switch on the set screen.
* Use the enclosed touch pen to press the reset switch. Do not use sharp points such as
mechanical pencils, as this may damage the switch.
2. The screen shown on the right will appear.
This display will appear after "WAIT" appears
momentarily.
3. To clear all memory data, press
Pressing any key will move on to normal function
calculation screen.
• To cancel the reset operation , press
¬
.
˚
.
34