L_Data - Sharp EL-9650 Operation Manual

CHAPTER 6

(3) L_DATA

As previously described, up to six lists, L1 to L6, can be
registered.
It is also possible to store all of the six lists and call them
up as one list data.
List data is stored in up to 10 memory spaces, L_Data 1
to L_Data 9, and L_Data 0.
If this function is used efficiently, up to 60 lists (6 × 10) may be stored.
This menu allows you to store and call up the list data.
1
[1 StoLD] Used to store the list as list data.
On the [C L_Data] selection screen:
Press to select StoLD. The screen shown to the
right will appear.
®
Press 1 to store the created list into L_Data 1.
If you wish to store the list into L_Data 2, press 2
instead of 1.
The message, "Done", showing the completion of data storage, will appear on the
screen.
[2 RclLD] Used to call up the stored list data.
2
The current list data is overwritten by called up list data.
On the [C L_Data] selection screen:
• Press to select [RclLD]. The screen shown to
the right will appear.
®
• Press 1 to call up list data 1.
The message, "Done", showing the completion of data
calling, will appear on the screen.
154