Sharp MD-MT270H Operation Manual page 29

! To display the playing time of an individual
track
1
Whilst in the stop mode, press the
ton to display the track number and track name.
Track number
Track name
2
Press the MENU/ENTER button.
3
Press the or button repeatedly to select
"DISPLAY".
4
Press the MENU/ENTER button.
5
Press the or button to select the playing
time.
Playing time
6
Press the MENU/ENTER button.
! Checking the remaining amount of battery
level
The remaining amount of battery level is shown by the
battery indicator ( ) during operation.
or but-
How to read the battery indicator
When the battery
level is high
" When the battery level is very low, the battery indicator
will flash. Replace the alkaline battery with a new one.
" When the battery has run out completely, "BATT
EMPTY" will appear. Then, the power will be discon-
nected automatically.
Notes:
" The battery indicator will not correctly display the
remaining capacity for approximately 10 seconds after
the power has been turned on.
" When the AC adaptor or a separately available car
adaptor is used, the battery indicator will not be
shown.
" The number of bars shown in the battery indicator may
increase or decrease, depending on the operation
being performed. This is normal.
02/11/7 MD_MT270H_SEEG_E4.fm
MD-MT270H
ENGLISH
When the battery
level is very low
E-22