Sharp MD-MT270H Operation Manual page 25

! To start recording from the middle of a track
You can erase a portion of a track and make a new
recording.
All of the tracks that follow the newly recorded track will
be erased.
1
During playback, press the button at the point
where you want to begin recording.
2
Press the REC button.
To cancel the operation, press the :OFF/HOLD button.
3
Press the MENU/ENTER button.
All of the tracks and track names will be erased, following
the point where the playback is paused.
4
Press the MENU/ENTER button again.
5
Press the or button repeatedly to select "REC
MODE".
6
Press the MENU/ENTER button.
7
Press the or button repeatedly to select the re-
cording mode (step 4, page 15).
8
Press the button.
Recording will start.
Notes:
" Complete the operation within 7 seconds whilst selecting
the menus.
" To keep a track after the point you want to make a new
recording, move the track and then make recording after
that point. (See "Editing a Recorded MiniDisc", page 29.)
02/11/7 MD_MT270H_SEEG_E4.fm
MD-MT270H
ENGLISH
E-18