Sharp MD-MT270H Operation Manual page 24

Advanced Recording (continued)
MD-MT270H
ENGLISH
! Playback sound-actuated recording
Recording automatically starts or pauses by detecting sound
from the stereo system (Synchronised recording).
1
Press the REC button.
2
Begin playback on the stereo system connected to
this portable MD.
3
Press the or button to adjust the recording lev-
el (see page 9).
4
Press the PAUSE button on the stereo system to en-
ter the playback pause mode.
Select the starting point for your recording and press the
PAUSE button.
5
Press the MENU/ENTER button.
6
Press the or button repeatedly to select "REC
MODE".
E-17
7
Press the MENU/ENTER button.
8
Select the recording mode (step 4, page 15) and press
the MENU/ENTER button.
9
Press the MENU/ENTER button.
10
Press the or button repeatedly to select
"SYNC ON".
11
Press the MENU/ENTER button.
" The BASS/SYNC button can be used instead of steps
9 - 11.
" "SYNC" will flash.
" To cancel the operation, press the :OFF/HOLD but-
ton.
" The mode will be set automatically after 7 seconds
even if the MENU/ENTER button is not pressed.
12
Begin playback on the stereo system.
Recording will begin automatically.
To interrupt recording
" When the stereo system is stopped, the unit will enter the
synchro recording pause mode. When playback is
resumed, recording will also resume.
" If a silence lasts for 3 seconds or more, recording will be
paused (pause function does not work for approximately
10 seconds after recording starts). When the unit receives
sound again, recording automatically starts.
" A new track number is created when recording resumes.
02/11/7 MD_MT270H_SEEG_E4.fm