Sharp XL-UH2080H Operation Manual page 31

Timer playback
Before setting timer:
1 Check that the clock is set to the correct time (refer to page 13).
If it is not set, you cannot use the timer function.
2 For timer playback: Load disc to be played.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
select "ONCE" or "DAILY", and press the MEMORY button.
Set the clock to the correct time if "ONCE" or "DAILY" does not
appear.
Advanced Features
4
Within 10 seconds, press the
select "ONCE SET" or "DAILY SET", and press the
MEMORY button.
5
Press the
then press the MEMORY button.
The illustrations show the timer playback setting in the daily
timer mode.
6
Press the
then press the MEMORY button.
7
Set the time to finish as in steps 5 and 6 above.
8
Switch input with the
press the MEMORY button.
or button to
To select the timer playback source: CD, TUNER, USB or
AUDIO IN.
or button to adjust the hour and
or button to adjust the minutes and
or
When you select the tuner, select a station by pressing the
or button, and then press the MEMORY
button.
If a station has not been programmed, "NO PRESET" will be
displayed and timer setting will be cancelled.
XL-UH2080H
or button to
button, and then
31