Selecting Memory Settings; Creating Memory Settings; Renaming Memory Settings - Epson PowerLite Pro Cinema 31000 User Manual

Selecting Memory Settings

You can easily recall the memory settings by using the memory
button on the remote control.
1. Press the
2. Select
Load Memory
3. Use the arrow buttons to select the desired setting, then press
the
Enter
After a moment, the image appears on the screen using the
retrieved settings. Certain settings may not be applied, depending on the input signal.
Note: Because of the mechanical nature of the lens, you may need to fine-tune the adjustment
after loading a saved lens position.

Creating Memory Settings

Memory settings can be used to store most of the picture quality settings on page 34 and color
settings on page 36. Before saving them to memory, adjust the settings to the desired levels.
1. Press the
2. Select
Save Memory
3. Select the memory name you want to use, then press the
settings.
Note: Saved settings are indicated by a green highlight
a name that is already in use, the existing settings will be erased and new ones saved in their
place.

Renaming Memory Settings

You can rename memory settings so that they are easier for you to recognize.
1. Press the
2. Select
Rename Memory
3. Select the memory name you want to change, then press the
selection screen is displayed.
4. Do one of the following:
■
To select a name from the displayed preset names, select the desired name and press
the
Enter
40
Making Detailed Adjustments
button on the remote control.
Memory
or
Load Lens Position
button.
button on the remote control.
Memory
or
Save Lens Position
button on the remote control.
Memory
or
Rename Lens Position
button.
.
.
button to save your
Enter
next to the memory name. If you select
.
button. The name
Enter