Positioning The Image - Epson PowerLite Pro Cinema 31000 User Manual

If you press the
the source button to move through the list and select the desired source.
Note: If an image does not appear, see "Problem Solving" on page 61.
To temporarily turn off the image and darken the screen, press the Blank button on the remote
control. Press the Blank button again to return to normal viewing.

Positioning the Image

You can display a test pattern to help adjust the image position by pressing the
button on the remote control. Select
button to turn off the test pattern. You can also use the
displaying color bars (see page 36).
If the image is not centered on the screen, use the lens shift function, as described below, to
adjust its position.
■
If the image looks like
Instead, keep the projector level, then use the lens shift to position the image on the
screen.
■
If the image looks like
screen and angled toward it. Instead, face the projector straight ahead, then use the lens
shift to center the image.
source button on the projector, you see a list of available sources. Press
Display Position
or , make sure the projector is not tilted up or down.
or , the projector has been placed off to one side of the
, then press . Press the
Enter
button to isolate colors when
Pattern
Setting Up the Projector
Pattern
Esc
23