Table of Contents
Advertisement
Turning Off the Projector
1. Turn off any equipment connected to the projector.
2. Press the Ppower button on the projector or the P
control. When you see a confirmation message, press the button again to turn the
projector off.
Caution: Turn off this product when not in use to prolong the life of the projector. Continuous
24-hour-a-day use may reduce the overall life of the product.
Note: You can disable the confirmation message if you only want to press the button once to
turn off the projector (see page 43).
3. If you need to move the projector, wait for the Ppower light to stop flashing, then turn
off the projector's main power switch on the back. You can now unplug the projector.
Caution: Never turn off the main power switch without first turning off the projector and letting it
cool as described above, or you could damage it and reduce lamp life.
Selecting the Image Source
The source buttons on the projector and remote control let you switch between images from
different pieces of equipment connected to the projector (such as a DVD player, cable or
satellite box, or video game console).
Press the
Source
video source is connected.
22
Setting Up the Projector
button on the remote control that corresponds to the port to which your
button on the remote
Standby
Advertisement
Table of Contents
