Royal Registerlink User Manual page 21

Highlight the data selection (clerk, department, logo, PLU, print, or scroll) from the drop-down list to
add or edit custom register settings. Then click in each column to edit the data. When you are
finished, click on "OK" or "Apply" to save any changes. Click on "Cancel" to abort and return to the
Backup, Edit and Restore screen.
To Restore
In addition to guarding against data loss on the register, the Restore function allows you to copy
settings from one cash register to one or more additional cash registers. Please follow the steps below
for Restore:
1. Before you begin the restore function, run the "Z" Report, which clears all transaction totals to
zero, except the running grand total.
2. With the register in PRG Mode, set the Flag Option Settings. Instructions for this should be in
the instruction manual for your cash register.
3. Turn the cash register mode key to the "X" Mode.
4. Select the "Backup/Restore Register" button from the main screen of the RegisterLink
software on your PC and click on the Restore radio button.
5. Use the drop-down list next to Filename, or click on "Browse" to select the .crs file with which
you want to restore.
6. Click on the Begin Restore button to start the process. The status of the restore will appear in
a new box. If you want to cancel the process, click on the "Cancel" button you see under the
progress bar.
7. Wait until you see the message "Restore Complete," select "OK" and the restore will be
complete.
8. Set the Date, Time, Tax Rates, Coupon key, % Discount key and % Add-on key on your cash
Copyright (C) 2002-2007 by CompanionLink Software, Inc. All Rights Reserved.
Backup/Edit/Restore Register 21