Epson EX90 User Manual page 64

note
When is
Direct Power
turned on, press the
button to turn
Power
the projector off, wait until
the power light turns a
steady orange, then unplug
the power cord.
Fine-tuning the Projector
64
■ Projection
Projector is in front of the screen.
Front:
Projector is in front of the screen, mounted
Front/Ceiling:
upside-down from the ceiling.
Projector is behind the screen.
Rear:
Projector is behind the screen, mounted
Rear/Ceiling:
upside-down from the ceiling.
To change from
Front
, press and hold the
Rear/Ceiling
remote control for five seconds.
■ Operation
When this feature is enabled, projection starts
Direct Power:
as soon as you plug in the power cord. You don't have to
press the
Power
When Sleep Mode is on, the projector turns
Sleep Mode:
off the lamp if it has not received any input signals for a
period of time (as defined in the Sleep Mode Time setting).
Sleep Mode Time:
period of time before the projector turns off automatically,
from 1 to 30 minutes.
Lens Cover Timer:
the power off automatically when the
closed for more than 30 minutes.
High Altitude Mode:
altitude above 4,900 feet (1,500 meters), turn this setting on
to ensure that the internal temperature of the projector is
regulated properly. Turn this setting off for lower elevations.
■
Link 21L
Turn this setting on only if you're controlling the projector
from a computer with the EMP Link 21L software and the
USB communication driver. This software can be
downloaded from the Epson website at support.epson.com.
(You must turn the projector off and then on again and
connect a USB cable to use this setting.)
to or
Front/Ceiling
A/V Mute
button.
When Sleep Mode is on, you can set the
This feature is enabled by default to turn
A/V Mute
When using the projector at an
to
Rear
button on the
slide is