HP StorageWorks 9000 - Virtual Library System User Manual page 106

Status message
Importing/Out of Sync*
Mirror Preprocessing*
Mirror Postprocessing*
Managed
Acquired
Positioning
Copying
Readmeta
Writemeta
Rewind
Empty Tape
Copying
Used Tape
Full Tape
Unloaded Full Tape
Waiting for Load
Tape Currently Not
Needed
Bad Tape
Unloaded Tape
Waiting for Load
Tape Currently Not
Needed
Ready For Import
106 Automigration/Replication
Pool type Description
Importing status on the destination library, Out Of Sync status on
Echo Copy
the source VLS.
Echo Copy Gathering the deduplication instructions needed for replication.
Expanding deduplication instructions to update the target cart-
Echo Copy
ridge.
Smart Copy Inactive.
Smart Copy Reserved by the backup application for I/O commands.
Smart Copy The backup application is adjusting the read/write position.
Smart Copy The backup application is copying data to/from the cartridge.
Smart Copy The backup application is reading metadata from the cartridge.
Smart Copy The backup application is writing metadata to the cartridge.
Smart Copy The backup application is rewinding the cartridge.
Tape Export The physical tape has not yet been used yet.
Tape Export Copying a source virtual cartridge onto this physical tape.
Tape Export Tape contains export data.
Tape contains export data and is ready to be ejected. Signal to
Tape Export
tape operator to unload this tape from the physical library.
Tape contains export data and has been ejected. This tape should
Tape Export
be included in the collection to be sent to the target site.
Tape that contains data that will be imported when the tape op-
Tape Export erator moves it into an Import pool slot. Signal to tape operator
to load this tape into the physical library.
Tape in an Import pool slot that is in the catalog, but not needed
Tape Export yet. Signal to tape operator to remove the tape from the physical
library.
Unable to write tape. It does not contain any export data and is
Tape Export ready to be ejected. This tape should NOT be sent to the target
site.
Tape Import Tape that contains data that will be imported later.
Tape that contains data that will be imported when the tape op-
Tape Import erator moves it into an Import pool slot. Signal to tape operator
to load this tape into the physical library.
Tape in an Import pool slot that is in the catalog, but not needed
Tape Import yet. Signal to tape operator to remove the tape from the physical
library.
Tape Import Tape in an Import pool slot that is in the catalog.