Extended Fabric Tab (Optional Software) - HP StorageWorks 8B - FC Entry Switch User Manual

OK
Apply
Close
Reset

Extended Fabric Tab (Optional Software)

Use the Extended Fabric tab to manage the Extended Fabric feature. From the Extended Fabric tab
you can specify which ports to be configured for distance and at what level. The Extended Fabric
tab appears only when the Extended License is installed on the switch. For ports that are disabled,
the rows appear grayed-out in the table within the Extended Fabric tab. The Extended Fabric is
shown in Figure 4-10.
Web Tools User's Guide
Click to save the changes made to the tab and to exit the tab.
Click to save the changes made to this tab and to stay in the current tab.
Additional changes can be made and the APPLY button pressed when
making changes incrementally.
Click to exit the current tab. If changes have been made but not
committed by clicking the APPLY button, a dialog box displays.
Click to reset the tab to the last set of committed changes. If the Apply
button has not been pressed on this tab, the parameters are returned to
the original values the tab had when it was initially displayed.
4
Switch View
4-55