Administrative Interface - HP StorageWorks 8B - FC Entry Switch User Manual

4
Switch View
The following is a list of all the possible options that are available by right-clicking your mouse in
a particular graph.
Note:
Zoom In
Remove
Print
Show Tx/Rx
Show Tx
Show Rx
Show Crc
Tools Tips
Each graph provides additional information when you roll your mouse-pointer over a graph.
The following is a list of all the possible Tools Tips information that is available by rolling over a
graph with your mouse pointer
Note:
Top 5 busiest port(s)
Tx=0.0, Rx=0.0
CRC=0
SCSI RW=0
SCSI RD=0
SCSI WR=0
0

Administrative Interface

The Administrative Interface provides access to the administrative functions though the following
tabs:
•
Switch Settings Tab
4-38
Not all graphs will have all options available, but every graph supports at least the first three
options.
Select to "Zoom In", or magnify a single graph,
rather than viewing multiple graphs on one canvas.
Select to delete any graph from the canvas.
Select to print any graph.
Displays number of bytes being both transmitted
and received.
Displays number of bytes being transmitted.
Displays number of bytes being received.
Displays amount of CRC errors being transmitted.
Not all graphs will have all options available, but nearly every graph supports at least one
Tools Tip.
Displays the five ports that are transmitting and
receiving the most bytes.
Displays the number of bytes being transmitted and
received.
Displays the number of Cyclic Redundancy Errors
being transmitted on a port.
Displays the number of SCSI commands being read
or written on a port or on a given port to a specific
LUN.
Displays the number of SCSI commands being read
on a port or on a given port to a specific LUN.
Displays the number of SCSI commands being
written on a port or on a given port to a specific
LUN.
4
Web Tools User's Guide