Remote Switch Tab (Optional Software) - HP StorageWorks 8B - FC Entry Switch User Manual

Remote Switch Tab (Optional Software)

Use the Remote Switch feature to configure a pair of switches to operate over an extended WAN
interface so that they can communicate across an ATM network by using a compatible Fibre
Channel to ATM gateway. This feature requires an active Remote Switch license in both switches.
For detailed information on the Remote Switch feature, see the Distributed Fabrics User's Guide.
Use the Remote Switch tab to manage the Remote Switch option. This tab displays only when the
Remote Switch is installed. The Remote Switch tab is shown in Figure 4-7.
Figure 4-7
Following is a description of the fields on the Remote Switch tab:
Remote Switch Status Section
Enabled
Disabled
Web Tools User's Guide
Remote Switch Tab
Click on radio button to enable the Remote Switch feature, or uncheck
to disable it.
Click on radio button to disable the Remote Switch feature, or
uncheck to disable it.
4
Switch View
4-49