Warming Shelf - Left Or Right Hand Location - Stanley Errigal Installation And Operating Instructions Manual

WARMING SHELF - LEFT OR RIGHT HAND LOCATION

ASSEMBLY INSTRUCTIONS
1 /4
1. Remove the
head screws (2 off) from the hob and
1 /4
(6mm) x " (6mm) round head screw (1 off)
from the front and dispose of (used for
packing purposes only).
2. Bolt the bracket (2) to the Warming Shelf (1)
1 /2
using the 1
screw (6) and the 1" (25mm) x
hex head bolt (9) and
vided.
3. Place the Warming Shelf beside the hob (3)
keeping the top face flush with the hob top
and in line with the front of the hob.
4. Attach Warming Shelf to hob with
1 /4
(12mm) x " (6mm) hex head bolts (8) pro-
vided and fit 1" (25mm) x
round head screw (7) to front.
5. Tighten all screws.
Fig. 18
1 /4
" (6mm) x " (6mm) round
1 /4
" (38mm) x " (6mm) csk
1 /4
" (6mm)
3 /8
" washers (10 pro-
1 /2
1 /4
" (6mm)
CONTENTS
1. Warming Shelf (1 off).
1 /4
"
2. Bracket to Shelf (1 off).
3. Hob of Stove.
4. Front of Stove.
5. Side of Stove.
6. 1
plated (1 off).
7. 1" (25mm) x
(1 off).
1 /2
8.
off).
9. 1" (25mm) x
off).
" 3 /8
10.
14
1 /2 1 /4
" (38mm) x " (6mm) csk chrome
1 /4
" (6mm) R.H. chrome plated
1 /4
" (12mm) x " (6mm) hex head bolts (2
1 /4
" (6mm) hex head bolts (1
" (9mm) Washers (2 off).