Table of Contents
Advertisement
User's Logo Menu
The user's logo menu allows you to set logos on the screen.
How to set the user's logo
1. Press the <Menu> button to open the Menu window.
2. Select the User's logo by pressing the <Sync +/-> buttons
on the control panel or the Pointer button on the remote
control. Then press the <Enter> button(control panel) or
either multi-purpose button(remote) to display the User's
Logo Setting window.
3. Select Yes or No by pressing the <Tracking +/-> buttons
on the control panel or Pointer button on the remote
control. Then press the <Enter> button (control panel) or
either multi-purpose button(remote) to determine.
4. You can select the area to display the user's logo by using
the <Sync +/-> buttons. If you determined the position,
press the <Enter> button (control panel) or either multi-
purpose button(remote).
5. The message of "Do you use this image?" appears on the
screen.
Select Yes and press the <Enter> button (control panel) or
either multi-purpose button(remote).
*If you want to change the position, select No.
6. Next, the Backcolor and Zoom rate setting window
appears on the screen.
7. You can select them by using the <Sync +/-> buttons.
Press the <Enter> button (control panel) or either multi-
purpose button(remote) to determine.
8. Then the message of "Do you save the user logo ?"
appears on the screen.
Select Yes.
46
Using the Projector Menus
Advertisement
Table of Contents
