User's Logo Menu - Epson EMP-7500 Owner's Manual

User's Logo Menu

46 Using the Projector Menus
Downloaded from:
The user's logo menu allows you to set logos on the screen.
H ow to set the user's logo
1. Press the <Menu> button to open the Menu window.
2. Select the U ser's logo by pressing the <Sync +/ -> buttons
on the control panel or the Pointer button on the remote
control. Then press the <Enter> button(control panel) or
either multi-purpose button(remote) to display the U ser's
Logo Setting window.
3. Select Yes or N o by pressing the <Tracking +/ -> buttons
on the control panel or Pointer button on the remote
control. Then press the <Enter> button (control panel) or
either multi-purpose button(remote) to determine.
4. You can select the area to display the user's logo by using
the <Sync +/ -> buttons. If you determined the position,
press the <Enter> button (control panel) or either multi-
purpose button(remote).
5. The message of "D o you use this image?" appears on the
screen.
Select Yes and press the <Enter> button (control panel) or
either multi-purpose button(remote).
*If you want to change the position, select N o.
6. N ext, the Backcolor and Zoom rate setting window
appears on the screen.
7. You can select them by using the <Sync +/ -> buttons.
Press the <Enter> button (control panel) or either multi-
purpose button(remote) to determine.
8. Then the message of "D o you save the user logo ?"
appears on the screen.
Select Yes.
http://www.usersmanualguide.com/