User's Logo Menu - Epson EMP-TS10 User Manual

Environment Setting Menu Functions and Operations
Main menu
Setting

User's Logo Menu

Main menu
User's Logo
24
Sub-menu
H-Keystone Corrects horizontal keystone distortion in images.
When keystone correction is carried out, the image becomes smaller.
If using both horizontal and vertical keystone correction, first make the
vertical correction and then make the horizontal correction in that order.
The keystone correction settings are memorized, so that if you change the
position or angle of the projector, you may need to readjust the keystone
correction settings.
If the images become uneven in appearance after keystone correction is
carried out, decrease the sharpness setting.
If you carry out both horizontal and vertical keystone correction, the
correction range will become smaller than it would be if only one type of
correction was carried out.
P in P Sets the input source for the sub-screen of the Picture in Picture function to
either Composite Video or S-Video.
The Picture in Picture function can be used by pressing the [P in P]
button. (p.32)
No-Signal Sets the message status and background color at times such as when no
Msg. image signal is being input.
To change the user's logo, you need to record and set your own logo.
(p.51)
Prompt Sets whether the source prompt for the input image is displayed on the
screen or not.
A/V Mute Sets the screen status when the [A/V Mute] button is pressed.
To change the user's logo, you need to record and set your own logo.
Comp1 Input Sets the image signal for Computer 1 input.
Comp2/ Sets the image signal for Computer 2 input.
YCbCr
Input
Sleep Mode Sets the energy saving operation when no image signal is being input.
When set to ON, projection stops automatically and the projector changes
to sleep mode if no operations are carried out for 30 minutes while the
"No-Signal." message is being displayed. (The
orange.)
Projection starts again when the [Power] button is pressed.
Reset Returns the adjustment values for the Setting menu to their default settings.
Press the button on the projector's control panel or the [Enter] button
on the remote control to display the confirmation screen, and select Yes.
Select Reset All to return all menu settings to their default settings. (p.27)
Sub-menu
Execute Records a user's logo. (p.51)
Press the button on the projector's control panel or the [Enter] button
on the remote control, and follow the operations given in the screen that
appears.
Function
indicator lights
Function
Default
setting
Median value
(0)
Composite
Blue
ON
Black
Digital-RGB/
Analog-RGB
YCbCr
ON
-
Default
setting
EPSON logo