Table of Contents
Advertisement
About Menu
The About menu displays the following information about
your projector. Press either multi-purpose button(remote) or
the <Enter> button (control panel) to display the information.
• Image source is computer.
Frequency
Resolution
Refresh Rate
Lamp
• Image source is video.
Video Signal
Lamp
RESET ALL Menu
Executing this command resets the settings in all menus to
their factory defaults.
While executing this command, the OSD menu disappears
from a screen and "RESET ALL" will be flashing on the
center of the screen.
Select this item and then press either multi-purpose
button(remote) or the <Enter> button(control panel) to
display the confirmation screen.
Displays H/V frequency of the current computer.
Displays Resolution of the current computer.
Displays Refresh Rate of the current computer.
Displays the number of hours the current projector
lamp has been used. The color of this display turns red
when the projector lamp is near the end of its normal
life. When this happens, replace the projector lamp
with a new one as soon as possible.
Displays the current video signal.
Displays the number of hours the current projector
lamp has been used. The color of this display turns red
when the projector lamp is near the end of its normal
life. When this happens, replace the projector lamp
with a new one as soon as possible.
Menu Options
49
Advertisement
Table of Contents
