Advertisement
Drying
Procedures,
continued
4.
Select the appropriate
cycle and settings
for each
load.
Over-drying can cause wrinkles, shrinkage, lint,
harshness and a build up of static electricity.
• Turn the cycle selector knob in either direction to select
the cycle desired. The indicator for that cycle will be
illuminated.
The estimated drying time for Auto Dry cycles or the
actual drying time for Timed Dry cycles will be dis-
played.
A suitable drying temperature, dryness level and op-
tions will automatically be indicated for the cycle select-
ed. See the "Dryer Settings Chart" for more details.
To change the drying temperature and dryness level,
press the Temperature
or Dryness buttons to scroll to
the desired settings.
To select or delete an option, press Options; then,
while the indicator is blinking, press Select. The indica-
tor will light when the option has been selected. It will
no longer be lighted when the option has been deleted.
_.l®_ ::sTo provide the best care for your laundry, not every
setting or option is available with every cycle. If a setting or
option is not available for the cycle selected, the indicator will
not light.
Adjustments made to a cycle will be remembered and
recalled each time that cycle is selected in the future.
To return to factory settings, press the Start/Pause
and Select buttons at the same time and hold until the
signal sounds.
@ M ;: x i
_ 1
@ H£h
@ M{}r
Dry
@ qdun
No_s
0 Sf/}l
6ua_
It_
Ra
D w/ess
F
e
Press and hold both for ten seconds
to return to factory settings.
5.
Start the cyde.
• To add or remove items when the dryer is running,
open the door. The dryer will stop when the door is
opened. Allow the drum to come to a complete stop
before reaching inside.
• Close the door and press Start to resume the cycle.
6.
When the cycle ends, remove items immediately
and hang or fold.
Clean the lint filter after every load.
OPERATING
INSTRUCTIONS
R_wels
Heavy
D@_,
Ho_ma_
Pe_m Rr_SS
Delka
es
[O_.JJ(h
U l}
@ rvta>'m m
@ Hgb
@ _,%re _}ry
@_edum
@N@_mal
@Sh
nk(;sard
@Lew
@ ess ) y
@_ tended
umbe
®srxhx
@ 8(_o'/ Belch
OAr
t
f/
@Damp
Dry
Sig/_a
V luHe
£¢dedT_ie
NO Neak
/reed
D,y
T_mpe_ah_r( _
Dl!'W_ess
Opti@}s
5tar_ _/IPa_se
This manual covers many models and not all cycles, options, or features listed are available on
every model. Console shown above for reference only. Your model may differ.
Cycle Selection
Turn the cycle selector in either direction to the cycle desired.
The indicator for that cycle will be illuminated.
For best
results
Follow the fabric care label
instructions on items to be
washed.
To change the cycle once it has begun, press the cancel
button before selecting a new cycle. Just turning the cycle
selector knob to another selection will not change the cycle.
If the selection is changed after the cycle starts, the indicator
lights will blink, the signal will beep and "Err"
will be
displayed. The signal will beep and the status lights will flash,
but the original cycle will continue.
Advertisement
