Crosley 134539400 (0503 Operating Instructions Manual

DRYER OPERATING iNSTRUCTiONS
AUTO DRY
SECIIAGE AUTOMATIQUE
Perm Press
Pressagepermanent
Normal
Serviettes _Iv A
lsOO_
3O
¢
45
TIMED DRY
SI_CHA6 E MINUTE
_Quick
Rapide
Touch Up
l_ repassagel_er
FOgo
3
Q 7s
6O
High
l_lev6
NoHeat
Sanss_hage_cfiaud
MoreDry
Med Q Plussec
Moyen
Q Normal
Normal
LessDry
Moinssee
Damp
B_S _ Humlde
PressSaver
Q Garde-pll
o CycleSignal
Signalsonere
TEMP DRYNESS OPTIONS SELECT
TEMPERATURE SECNAGE LESOPTIONSSELELq'IONNER
©
Drying/s6chage
(_) Cool DOWrl/l_ef roldlssement
Press Saver/Antifroissement
(_ Clea n Lent Filter/Nettoyerleliltre_ charpie
_D Co,trol/commande
START PAUSE/CANCEL
MISt EN MARCHE PAUSF/ANNULER
Before operating Your Dryer
Read your dryer Owner's Guide. It has impor-
tant safety and warranty information. It also has
many suggestions for best drying results.
To reduce the risk of fire, electric
shock or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer Owner's
Guide before operating this appliance.
Operating Steps
Read "Drying Procedures" in your Owner's Guide.
It explains these operating steps in detail.
1. Prepare items for drying.
2. Check that lint screen is clean and in place.
3. Load the dryer. If desired, add a dryer fabric
softener sheet. Close the door.
4. Select the cycle and drying temperature for each
load. To change the temperature, turn the TEMP
knob to the desired temperature.
Follow the same steps to delete an option. If a
dryness level or option is not available for a
cycle,it will not light.
6. The changes you make will be remembered the
next time that cycle is selected. See the "Dryer
Settings Chart" for more details.
,
Press START to begin cycle.
• To pause the cycle or change settings,
press PAUSE/CANCEL once.To resume
the cycle, press START again.
To stop or change the cycle, press
PAUSE/CANCEL twice.
8. A signal will sound at the end of the cycle and
periodicallyduring Press Saverwhen the Cycle
Signal option is selected. When the cycle ends,
remove items immediately and hang or fold.
9. Clean the lint screen after every load.
Cycle Selection
For best results, follow the fabric care label instruc-
tions on items to be dried.
Auto Dry
Auto Dry cycles take the guesswork out of drying
time. The load will automatically be dried at the
selected temperature to the desired dryness level.
The dryer senses the moisture level of the load as
it tumbles through heated air. Auto Dry cycles save
time and energy and protect fabrics.
When the load has reached the selected dryness
level, it will continue to tumble, unheated, during a
Cool Down period. This helps reduce wrinkling and
makes items easier to handle during unloading.
Drying time varies depending on size and damp-
ness of load, weight and fabric type. Room tem-
perature and humidity, type of installation and elec-
trical voltage or gas pressure can also affect drying
time.
Towels
Select this Auto Dry cycle for towel loads.
5. A suitable dryness level and options will auto-
matically be displayed for each cycle. To
change the dryness level, press DRYNESS until
the desired selection is made. To select an
option, press OPTIONS until the indicator for a
desired option flashes and press SELECT.
Normal
Select this Auto Dry cycle for cotton items,
Perm Press
Select this Auto Dry cycle to dry cottons and blends
with a no-iron finish.
PN 134539400 (0503)