Epson EMP-280 User Manual page 29

List of Functions
Sub Menu
Operation
Direct Power On: You can set whether Direct Power On is enabled (On) or disabled (Off).
When it is set to "On" and the projector power cable is connected to an electrical outlet, be aware that sudden surges of electricity may cause the
projector to turn on automatically.
Sleep Mode: When set to "On", this turns off the power automatically when no image signal is input and no operations are performed.
Sleep Mode Time: When Sleep Mode is set to "On", you can set how long the projector should wait before turning off the power from 1 to
30 minutes.
High Altitude Mode: Set this to "On" when using the projector above an altitude of 1500 m.
Standby Mode
You can use network monitoring and control functions while the projector is in standby mode when this is set to "Network On".
(EMP-280 only)
You can monitor and control the status of a projector over a network using the "EMP Monitor" application software
Link 21L g You can set whether to use the utility software EMP Link 21L (On) or not (Off). Set this to "On" and use it after installing the USB
(EMP-260 only)
communication driver.
Air Filter Setting Clean Notice: When this is set to "On", a message is displayed if the filter becomes clogged with dust or dirt.
Clean Notice Timing: When Clean Notice is set to "On," the timing at which the message is displayed can be set to one of five options. When the
projector is used at a high elevation or in a particularly dusty environment, make this setting such that the message is displayed more quickly
than normal.
Language You can set the language for message displays.
Reset
You can reset "Display
To return all menu items to their default settings, see s
*1 You can download EMP Monitor from the Support section of the Epson Website for your locale at http://www.epson.com. EMP monitor is application software for
monitoring and controlling the status of multiple networked Epson projectors, displayed on your computer screen.
*2 When "User's Logo Protect" is set to "On" in "Password Protect", settings concerning user's logo cannot be changed. You can make changes after setting "User's
Logo Protect" to "Off". s
*3 Except for "High Altitude Mode".
*2 " and "Operation *3 " in the "Extended" menu to their default settings.
p.18
Function
p.31
29
*1 .