Setup Menu; Auto Ch. (Channel) Search - Zenith Sentry 2 Series Operating Manual & Warranty

SETUP MENU
SETUP MENU
* Some models
AUTO CH. SEARCH
CH. ADD/DEL
-> CH. LABELS *
TUNING BAND
AUTO FINE ]LINE
CLOCK SET
CAP11ONS
CH. BACKGROUND
CH 13 ABC
AUTO OH. (Channel) SEARCH
Purpose
Finds all available channels and stores them in memory for
access by CHANNEL (CH) Up/Down.
Use AUTO CH. SEARCH only when you first install your
TV, or when you permanently change the connections to
the TV. For example, when you replace the antenna with a
cable-TV system.
Programmed channels are stored in protected memory, and
are not affected by a power outage.
Before Using AUTO CH. SEARCH
Connect and turn ON all external equipment, such as cable
TV decoder, VCR, etc.
To Use AUTO SEARCH
1. AUTO CH. SEARCH should be selected if you
followed the "Basic Menu Operation" given in the
"On-Screen Menus" section.
2. Press ADJUST (ADJ) Left/Right to start the
AUTO CH. SEARCH, the status of the search is
shown in tile display. When the search is complete,
you can watch the TV program of your choice.
When Some Channels Are Not Found
AU'I_ CH. SEARCH finds only active dmsmels and stores
them in the',favorite channel memory. You can add channels to
those stored in memory by t_fing the CH. ADD/DEL opdom
If you haw_ difficulty tuning some channels, you may have to
manually change the TUNING BAND and AUTO FINE
TUNE. Refer to respectiw: option for details.
SETUP MENU
-> AUTO CH. SEARCH
CH. ADD/DEL
CH. LABELS
TUNING BAND
AUTO FINE TUNE
CLOCK SET
CAPTIONS
CH. BACKGROUND
START
Selecting Auto Ch. Search
DETERMINING TUNING BAND
TUNING BAND IS
CH r-_ is FOUND
ALrI_ (_t SF_ARC_ HAS COMPLE'I_)
TUNING BAND IS
E_ CHANNELS FOUND
CH 2
Determining
Tuning Band
J
While Searching for
Active Channels
J
When Search is
Complete
When :Returning to
Channel Display
zsg_A 8 - 1