Basic Menu Operations - Zenith Sentry 2 Series Operating Manual & Warranty

ON-SCREEN MENUS
BASIC MENU OPERATIONS
Vertical Control Panel Shown
(Menu buttons are provided
on some remote controls.)
2. To Select an Option/Feature on a Idenu
Press SELECT (SEL) repeatedly until[ the desired
option/feature is highlighted. The following ex-
ample shows selecting TUNING BAND.
SETUP MENU
AUTO CH. SEARCH
CH ADD/DEL
CH. LABELS
TUNING BANE)
AUTO RNE TUNE
CLOCK SEI
C_110NS
CH. BACKGROUND
BRO_DC,_T
Selecting Tuning Band
3. To Adjust an Option/Feature
Press ADJUST (ADJ 1 Left/Right to see and choose
the available selections.
NOTE: Do not change channels during menu
operations unless instructed to do so in the proce-
dures given in this operating guide.
4. To Access a Different Main Menu
Press MENU repeatedly until the desired menu is
shown.
5. To Return to Normal Viewing
Press ENTER (ENT) or wait a few seconds and the
TV will return automatically to normal operation.
1. To See a Menu or Change Menus
Press MENU repeatedly until the desired menu is
shown. Example shows choosing the SETUP Menu.
SETUP MENU
-_ AUTO CH. SEARCH
CH. ADD/DEL
CH. LABELS
TUNING BAND
AUTO RNE TUNE
CLOCK SET
C_J_110NS
CH. BACKGROUND
START
Choosing Setup Menu
Service Menus: In addition to the menus shown above,
there are menus for factory and field servicing. Service
menus are not intended for use by the owner.
If you inadvertently acce_,s a service menu, press ENTER
(ENT) to return immediately to normal TV viewing.
2s_^ 7 - 2