Operation; Installing Batteries - Zenith Sentry 2 Series Operating Manual & Warranty

REMOTE CONTROL MODEL SC2300
OPERATION
VOLUME Ul_Down
Used to adjust the volume level of the TV.
MUTE
Used to turn off sound while the picture
remains. Press again to restore the sound.
Point
Toward TV
0
DCE
U_rE RECALL
Simple Remote
SC2300/BRC2300
OFF/ON
Used to turn TV ON or OFF.
CHANNEL U]_/Down
Used to sek_ a TV channel lay going up or
down through channels.
RECALL
Used to see Claannel/Time display for TV
having on-s_ze en displays. Press again to
remove display.
INSTALLING BATTERIES
When the effective range of the remote becomes noticeably
shorter, replace the batteries with two (2) high quality, size
AAA, alkaline batteries.
1. Remove the two (2) Phillip head screws from the
back of the remote control, and remove the com-
partment cover.
2. Insert the new batteries making sure the polarity
markings ("+" and "-") on the batteries match
those shown in the compartment.
NOTES:
• Be careful not to placa_heavy objects on top of the remote
control buttons. Prolonged accidental operation of the
remote control will shorten battery life.
• If you do not use the remote control for a month or more,
remove the batteries. Battery leakage can cause damage
to the remote control.
• Zenith is not responsible for damage caused by such
battery leakage.
O O
O O
zl_B 6 -- 1