Zenith TVSC0902 Operating Manual & Warranty page 10

9" color tv/vcr combination
Table of Contents

Advertisement

10 REC(ORD) button-
Press for manual recording.
OTR button- Activates One Touch Recording.
(Only on the TV/VCR)
11 VOLUME +/-(UP/DOWN) buttons-
Adjust the volume level.
12 CHANNEL UP/DOWN buttons-
Press to select the desired channels for
viewing or recording.
TRACKING function-
Press to minimize video
'noise' (lines or dots on screen) during
playback mode.
13 EARPHONE jack-
Connects to earphones (not supplied) for
personal listening. The size of jack is 1/8"
monaural (3.5mm).
14 Cassette slot-
Insert the cassette here.
15 Number buttons-
Press to select desired channels for viewing or
recording. To select channels from 1 to 9, first
press the 0 button and then 1 to 9.
100+ button- When selecting cable channels
which are higher than 99, press this button
first, then press the last two digits. (To select
channel 125, first press the "100+" button then
press "2" and "5").
16 MENU button-
Press to display the main menu on the TV
screen.
17 DISPLAY button-
Display the counter or the current channel
number and current time on the TV screen.
18 SPEED button-
Press to choose the desired recording speed:
SP/SLP.
19 T-PROG. CLEAR button-
Press to cancel a timer program setting.
(See page 27.)
COUNTER RESET button- Press to reset
counter to 0:00:00.
20 GAME button-
Sets the game mode and external input mode
at the same time.
21 TIME SEARCH button-
Press to activate 33me Search mode.
22 PAUSE/STILL button-
Press to temporarily stop the tape during the
recording or to view a still picture during
playback.
23 MUTE button-
Mutes the sound. Press it again to resume
sound.
24 CHANNEL RETURN button-
Press to go back to the previously viewed
channel. For example, pressing this button
once will change channel display from 3
(present channel) to 10 (previously viewed
channel), and pressing it a second time will
return from 10 to 3.
25 WAKE UP/SLEEP button-
Sets the Wake up or Sleep Timer.
26 ANT. terminal-
Connect to an antenna or cable system.
27 DC 13.2V jack-
Connect to the Car Adapter Cord.
28 AC 120V jack-
Connect to the AC cord.
- REAR VIEW -
27
28
26
- 10-
EN
9K16

Advertisement

Table of Contents
loading

Table of Contents