Tape Library Upgrade
190 NAS 8000 System and Hardware Upgrades
Adding a Tape Library
Tape libraries can be added to the HP NAS 8000 after the initial purchase
and installation.
Installing SCSI or FC HBA Cards
Adding a tape library to a system that was not purchased with one requires
installing SCSI or FC HBA cards in the NAS server. Contact your HP sales or
support representative for a list of supported HBAs.
To add a new tape library:
1
Power down the system in the following sequence before installing the new
cards:
—
Server
—
Array
—
UPS
2
Follow the instructions that come with your HBA cards to install the new
cards into the reserved PCI slots 1 and 2.
3
Follow the instructions that come with the tape library to connect the
library to the NAS server or SAN in one of the following configurations: