To back up files from the NAS server using OmniBack II for Windows NT:
1
Select Start > HP OmniBack II > OmniBack II Manager.
2
Verify that Backup is selected in the drop-down list in the top left corner of
the window.
3
Click the Tasks tab on the bottom of the screen, then click Interactive
Backup Wizard.
Figure 2
Interactive Backup Wizard
4
Change File System Backup to Network Share Backup in the drop-down
list.
5
Click Map Network Share.
6
Select Microsoft Windows Network >
the figure above, the Domain Name is MB, and the NAS Device is
NAS_A. Select the desired share.
Select the files or volumes you want to back up.
7
8
Select your backup options as you normally would, then start the backup.
Domain Name > NAS Device . In
Integrating with Network Backup Applications 163