Turning The Equipment On And Off - Epson PowerLite 7300 User Manual

Turning the Equipment On and Off

54
1 • Setting Up the Projector
Note: EPSON offers the Mediaphile PAS (personal audio system) for
external amplification. See page page 4 for the part number and
ordering information.
3. Connect the RCA plugs to the external amplified speaker or PA
system. Insert the cable's red plug into the Audio R jack, and the
white plug into the Audio L jack.
Note: The internal speakers are disabled when an external audio
system is used.
It's best to turn on the projector and its attached equipment in the
following order:
1. Video source (such as a VCR), if your video source is not your
computer
2. Audio source (if different from computer or video source)
3. Computer
4. External amplified speaker or PA system (if necessary)
5. Projector
When you are ready to turn off the equipment, turn them off in the
reverse order.