The illustration below identifies all the interface ports on the back of
the projector; you may want to refer to this as you connect your
computer or other equipment to the projector.
IR Repeater
Power Inlet
Connecting to a PC Desktop Computer
To connect the projector to your PC desktop computer, you need to:
Audio Out
Computer Out
R/R-Y G/Y G Sync B/B-Y
Connect the projector video cable and computer monitor cable
Connect the mouse and/or serial cable (if you want to use the
remote control as a mouse or use the ELP Link III software)
Connect the audio cable (if you'll be projecting with audio)
Audio 2
Audio 1
1
S-Video
Composite Video
Connecting to a Computer
Mouse/Com 2
Mouse/Com 1
Computer 2
Computer 1
BNC HD/Sync VD
19