Turning The Equipment On And Off; Turning The Projector On And Off - Epson EMP-713 Owner's Manual

Turning the Equipment On and Off

Turning the Projector On and Off

♦
♦
Downloaded from:
Turn on the projector and its attached equipment in the
following order.
1. Computer
2. Video source
3. Audio source (if different from computer or video source)
4. Projector
5. External speaker or PA system (if necessary)
When you turn off the equipment, do so in the reverse order.
1. Remove the projector lens cap.
2. When you plug in the projector power cord, the power
indicator flashes orange for few seconds. Then the light
remains orange.
3. Press the Power button on the remote control or
operation panel. The power indicator flashes green as the
projector warms up. When the projector is fully warmed
up, this light remains green.
If computer or video equipment is attached, the computer or
video signal is projected.
Warning: N ever look into the lens when the lam p is on. This can
dam age your eyes. It is especially im portant that children are not
allowed to look into the lens.
Caution: W hen turning the projector on or off with the rem ote
control, be sure to turn the rem ote control on first with the power
switch.
http://www.usersmanualguide.com/
Turning the Equipment On and Off 29