Connecting To A Powerbook - Epson PowerLite 7300 User Manual

Connecting to a PowerBook

40
1 • Setting Up the Projector
Your PowerBook must have video-out capability in order to connect to
the projector.
To connect the projector to your PowerBook, you need to:
Connect the projector video cable
Connect the mouse and/or serial cable (if you want to use the
remote control as a mouse or use the ELP Link III software)
Connect the audio cable (if you'll be projecting with audio)
Follow the steps in each section for the cables you need to connect.
Before beginning, turn off the projector and computer if they are on.
Note: PowerBook configurations vary, so the location of your computer's
ports may not match the illustrations. See your PowerBook manual for the
port locations if necessary.