Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Cordless driver drill
  5. 973.225410
  6. Operator's manual

Craftsman 973.225410 Operator's Manual

10 mm (318 in.) 14.4 volt cordless drill-driver variable speed / reversible
Hide thumbs

Advertisement

Quick Links

Download this manual
Operator's Manual
I:RRFTSMRNI
10 mm (318 in.) 14.4 VOLT
CORDLESS
DRILL-DRIVER
Variable Speed / Reversible
Stock No.
_922541
Model No.
973.225410
Save this manual for
future reference
• 1. CAUTION:
Read and follow all
Safety Rules and Operating Instructions
before first use of this product.
Customer Help Line: 1-877-369-8665
Sold
by: Sears
Canada
Inc.,
Toronto
M5B
2B8
Visit the Craftsman
web page:
www.sears.ca
960223153-01
8-03
• Safety
• Features
• Operation
• Maintenance
• Parts List

Advertisement

loading

Related Manuals for Craftsman 973.225410

Summary of Contents for Craftsman 973.225410

  • Page 1 Safety Rules and Operating Instructions before first use of this product. • Safety Customer Help Line: 1-877-369-8665 • Features • Operation Sold by: Sears Canada Inc., Toronto • Maintenance Visit the Craftsman web page: www.sears.ca • Parts List 960223153-01 8-03...
  • Page 2 CORDLESS DRILL-DRIVER If this CRAFTSMAN power tool fails because of defects in material or workmanship within three years from the date of purchase, return it to the nearest Sears Canada Inc. ("Sears") store and "Sears" will repair it, free of charge.
  • Page 3 Your drill-driver has many features for making your drilling WARNING: Do not attempt to use this product until operations more pleasant and enjoyable. Safety, you read thoroughly and understand completely the performance and dependability have been given top operator's manual. Pay close attention to the safety priority in the design of this drill-driver making it easy to rules including Dangers, Warnings and Cautions.
  • Page 4 Tool Use and Care • Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges • Use clamps or other practical way to secure and are less likely to bind and are easier to control, support the workpiece to a stable platform.

  • Page 5: Battery Terminal

    • That wire size is large enough for AC ampere _I, WARNING: Never use a battery that has been rating of charger as specified below: dropped or received a sharp blow. A damaged battery Cord Length (Feet) 25' 100' is subject to explosion. Properly dispose of a dropped battery immediately.
  • Page 6 Important: Some of the followingsymbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Current Amperes Hertz Frequency (cycles per second) Minutes...
  • Page 7 100 in.lb. Chuck 10mm (3/8 in.) Keyless Maximum Torque 1421416 Motor DC 14.4 Volt CHARGER Gear Train One Speed 120 V, 60 Hz,AC only Switch Variable Speed Rating 3-6 Hours No Load Speed 0-650/min. Charge Rate Clutch 24 Positions BA'I-rERY PACK 130139013 KNOW YOUR DRILL-DRIVER FORWARD/REVERSE...
  • Page 8 BITSTORAGE TORQUE SCREWDRIVER ADJUSTMENT R ING BITS KEYLESS CHUCK DIRECTIONOF ROTATIONSELECTOR (FORWARD/REVERSE) CHARGING STAND RED_ LIGHT WRIST STRAP BATTERY PACK SHOWNINTOOL Fig. 1 CHARGER SeeFigurel.
  • Page 9 WARNING: Do not allow familiarity with your drill- driver to make you careless. Remember that a careless fraction of a second is sufficientto inflict severe injury. CHARGING BA'n'ERY PACK See Figure t. The battery pack for this tool has been shipped in a low charge condition to prevent possible problems.
  • Page 10 SWITCH TO INSTALL BATTERY PACK See Figure 2. • Lock switch trigger on your drill by placing the direction To turn your drill ON, depress the switch trigger. To turn it of rotation selector in center position. See Figure 4. OFF, release the switch trigger.

  • Page 11: Switch Lock

    SWITCH LOCK KEYLESS CHUCK See Figure 4. See Figure 5. The switch trigger can be locked in the OFF position. This Your drill has a keyless chuck. As the name implies,you can feature can be used to prevent the possibility of accidental handtighten or release drillbits in the chuckjaws.
  • Page 12 INSTALLING BITS REMOVING BITS See Figure 6. See Figure 6. Lock the switch trigger by placing the direction of • Lock the switch triggerby placingthe directionof rotation selector in center position. See Figure 4. rotationselector in center position.See Figure 4. Open or close chuck jaws to a point where the open- •...
  • Page 13 DRILLING BIT STORAGE See Figure 9. See Figure 10. When not in use, bits provided with your drill can be placed in the storage area located on the bottom of your drill as shown in Figure 9. SCREWDRIVER BITS BITSTORAGE AREA Fig.
  • Page 14 CHUCK REMOVAL • Insert hex key in chuck and tighten chuck jaws se- curely. Tap sharply with a mallet in a counterclockwise See Figures 11, 12, and 13. direction. This will loosen chuck on the spindle. It can The chuck must be removed in order to use some now be unscrewed by hand.
  • Page 15 Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury. TOOLS, VISIT YOUR NEAREST SEARS RETAIL STORE. OR A COMPLETE SELECTION OF ACCESSORIES FOR THIS AND OTHER CRAFTSMAN POWER AND BENCH |...

  • Page 17: Parts List

    _----CRAFTSMAN 10mm (3/8 in.), 14.4 VOLT CORDLESS DRILL-DRIVER - MODEL NO. 973.225410"---_ in all correspondenceregardingyour10mm (3/8 in.), 14.4VOLT CORDLESS DRILL-DRiVER or when ordering I The model numberwill be found on a plate attached to the motor housing. Always mention the model number | repair pads.
  • Page 18 S /,4RS Operator's Manual STOCK NO. 9 22541 MODEL NO. 973.225410 Sears service is available at or through your Sears Retail Store or Catalogue Sales Office, How to order repair parts When ordering repair parts always give: 1. The Part Number CALL 1-800-665-4455 2.