Advertisement
Workpiece Support
Long pieces need extra supports. The supports should
be placed along the workpiece so the workpiece does
not sag and your hand holding the workpiece
is
positioned 4" or more from the blade path. The support
should let the workpiece lie fiat on the base and work
table during the cutting operation.
o
WORKPIECE
r
\
WORKPIECE
SUPPORT
Auxiliary Fence
Certain types of molding need a fence face extension
due to the size and position of the workpiece. HoPes
are provided in the fence to attach an auxiliary fence
made of straight wood typically v_ inch thick by 3 inches
high by 20 inches long. The auxiliary fence is used with
the saw in the 0° bevel position. If a bevel cut is desired,
the auxiliary fence will have to be removed.
it)
co
19
Advertisement
